From the notebook / Compatibility
Start with the keys you actually have.
A keycap set can look complete and still leave one position on your keyboard uncovered. Compare the exact board layout with the exact kit diagram before you buy.
Read the board, then the kit
Write down your keyboard’s model and layout. Check whether it uses an ANSI, ISO, or another physical arrangement, and compare the Enter and left Shift shapes. A percentage label alone is not a compatibility guarantee.
Account for the small differences
Check the spacebar, right Shift, bottom-row modifiers, and any extra keys in the navigation column. Kit diagrams often describe width in units, written as “u.” Use the manufacturer’s layout drawing to confirm each width rather than estimating from a photograph.
Check the underside, too
Confirm the keycap mount matches the switch stem and that stabilized keys are supported. If your keyboard has an unusual switch or low-profile construction, look for explicit compatibility from both manufacturers. A familiar-looking top surface does not establish a fit.
Keep an order note
Record the board revision, the kit name, and the specific keys you need. If a required dimension or mount is missing from the listing, treat it as unresolved and ask the seller before ordering. Do not rely on a general “universal” claim.
This is general editorial guidance. Confirm specifications for your exact keyboard, switch, and keycap kit before buying.
Back to the field notes